Satron Save Consistency Sampler

Sampler for easy and safe Sampling

SAVE has been designed for controlled and safe sampling of pulp slurry. SAVE’s head is shaped and dimensioned to ensure a representative sample. The sampler head is inserted deep into the process pipe, past the water layer flowing along the pipe wall.

SAVE’s interior parts can be flushed with water after the sample has been taken, to prevent build up or blockage of the sampler. Since the sampling valve’s shut-off mechanism is at the head of the sampler the SAVE will not get blocked even during long duty intervals.
SAVE’s piston utilizes metal-to-metal sealing does not include any wearing parts, such as rubber seals.


Satron Save Consistency Sampler features:
  • Easy and safe to use
  • Reliable-proven with over 100 installations
  • Few moving parts, No regular maintenance

​​Installation

SAVE is mounted at a point in the process line that will provide a representative sample. It must not be installed in a dead zone of flow. SAVE is mounted is an opening made on the process pipe through a process coupling selected in accordance with the Selection Chart. TA and SA couplings are welded on the process pipe, while an FA type is laminated on the plastic process pipe. After SAVE has been mounted on the process pipe you attach the supplied 400 mm(16") plastic discharge tube with a hose clamp. This will ensure that the sample will not splash.
Flushing with water is recommended in all installations. For this purpose a waterline equipped with a shutoff valve is needed to be connected to the sampler. Samplers with Titanium or Hastelloy C276 wetted parts must be connected to prevent corrosion of the samplers interior parts when flushing. Solenoid valves must be equipped with restrictors at outlet side to dampen the piston movement.


Manufactured by: Satron Inc., Finland